Auto Parts, Air Purifier, HEPA Filter, Oil Filter, Air Filter, Engine Parts, Air Compressor Parts, Spare Parts, Filter, Auto Filter, Cartridge Filter

• Clapboard: without Clapboard
• Filter Number: 1
• Medium Material: Fiberglass
• Efficiency: F5
• Filtration Grade: Medium Filter
• Type: Cartridge Filter
• Model NO.: YF-B130
• Material: Aluminum Alloy
• Housing Serve Lige: 15 Years
• Element Serve Life: 6000~8000 Hours
• Filtration Performance: From 5 μm to 0.01μm
• Maxi. Operate Pressure: 1.6 MPa
• Operate Temperature: 1.5~80ºC
• Connection: RC3"
• Flow Rate: 25.0m³/Min
• Resistance Corrosion: Inside and Outside
• Certificate: CE
• Customed: Available
• Element Grade: PF/Ao/AA/Ax/Acs/Ar/AAR
• Element Porosity: 96%
• Element Material: Borosilicate Fiber Glass
• Color: Light Blue
• Transport Package: Brown Inner Box & Cardboard
• Specification: Dimension: 220 X 184X 645mm
• Trademark: YUKA
• Origin: China
• HS Code: 8421399090
• Production Capacity: 500PCS Per Days

Product Description

Feature & Benefit

Low cost for Ownership
Advanced filter design to Optimize flow capacities, reducing differential pressure and thereby increasing energy efficiency.

Certified Performance
Tested validated in accoring with ISO 8573.1-2010, houing & elements are manufactured with highest quality materials to provide optimum performance & improved efficiency.

Improved Operating Conditions
Aluminum alloy, precision die-casting housing, suitable for operating temperature of 85 ºC and operating pressure of up to 16 bar, solution for your filtration requirements.

Product Safety
Housing Guaranteed closure with single-start thread and flixed thread engagement stop & lock indication arrows to invoid over tightening and ensure effective sealing.

Flexible Installation
Pipeline size from RC1/2" to RC4", flow rates from 1.0-48m³/min.

Guaranteed
Housing enjoy 15 years lifespan, element recommend 6000 to 8000 hours, depend on actual working condition.
 

7 Grades Filter Element:  PF,AO,AA,AX,ACS,AR,AAR
 

PF	AO	AA	AX	ACS	AR	AAR
As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible	High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21ºC),1ppm(w).	High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC),0.01ppm(w)	Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC),0.001ppm(w)	Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21ºC),0.003ppm(w)	Dust particles whose diameter more than 1μm can be removed	Dust particles whose diameter more than 0.01μm can be removed

 

International test and measurement standard ISO12500

>ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. The main performance

   parameters are the air inlet oil content and particles size distribution of the solid particles.

>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.

>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.

>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.

Product are test with the international advanced testing equipment based on standard ISO12500, Which is equivalent to the standard ISO8573.1-2010 quality standard,  and provide filter performance test report.

Filtration Grade 

Size of solid particles(ISO12500-3)

Filtration performance of solid particles(ISO12500-3)

Filtration performance of oil(ISO12500-1)

Residual oil content(ISO12500-1)

 

Technical Specification

The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g).
For application in other working pressure, please refer to the correction factors.

Model	Pipe size	Flow rates			Dimension (mm)
		L/S	m³/min	scfm	W(Width)	D(Depth)	H(Height)	A	B	C
YF-B010	RC1/2"	16.7	1.0	35.5	96	79	245	29	223	118
YF-B020	RC3/4"	25.0	1.5	53.0	96	79	245	29	223	118
YF-B030	RC3/4"	30.0	1.8	63.6	96	79	274	29	257	153
YF-B040	RC1"	33.3	2.0	71.0	96	79	274	29	257	153
YF-B060	RC1"	60.0	3.6	127.0	138	111	349	37	421	303
YF-B070	RC1"	83.3	5.0	177.0	138	111	450	37	421	303
YF-B080	RC1-1/2"	125.0	7.5	265.0	138	111	450	37	421	303
YF-B090	RC2"	166.7	10.0	353.1	174	142	558	58	500	467
YF-B100	RC2-1/2"	216.7	13.0	459.0	174	142	558	58	780	794
YF-B110	RC2"	283.3	17.0	600.0	174	142	838	58	780	794
YF-B120	RC2-1/2"	316.7	19.0	671.0	174	142	838	74	571	514
YF-B130	RC3"	416.7	25.0	883.0	220	184	616	74	571	514
YF-B140	RC4"	466.7	28.0	989.0	220	184	616	74	571	514
YF-B150	RC3"	683.3	41.0	1448.0	220	184	892	74	828	764
YF-B160	RC4"	800.0	48.0	1695.0	220	184	892	74	828	764
Technical requirements	Maxi. operating pressure: 16 barg  Operating temperature: 1.5°C~80°C

Pressure	Barg	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
	Psig	15	29	44	59	73	87	100	116	131	145	160	174	189	203	219	232
Correction factor		0.38	0.53	0.65	0.76	0.85	0.93	1.00	1.07	1.13	1.19	1.23	1.31	1.36	1.41	1.46	1.51

                                                                               

Product Application



YUKA service
a. Providing professional consultation, technical support and special solutions
b. Providing timely feedback on complaints
c. Providing perfect after sales service and warranty

Q:Why choose us?
a. 24 years' practical experiences in R&D and manufacturing Compressed air treatment;
b. Founder of Compressed Air Nation Standard GB/T30475.1-2013 and GB/T30475.2-2013;
c. ISO 9001:2015, CE and product follow ISO8573-1;
d. With Germany Imported high efficiency filtration Test Instrument;
e.All goods had been 100% test before dispatched.
  
Frequently Asked Questions
Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and sales.
 
Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production. 
 
Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5 working days after 30% payment.
 
Q4. Do you have a warranty?
Yes, for filter, it is 1 year normally.
 
Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the best solution and complete production processes and control to provide you with satisfied product.