Why we should choose efficiency compressed air treatment for compressed air system?
Compressed air purification equipment must deliver uncompromising performance and eliability whilst providing the right balance of air quality with the lowest cost of operation. Many manufacturers offer products for the filtration and purification of contaminated compressed air, which are often selected only upon their initial purchase cost, with little or no regard for the air quality they provide, the cost of operation throughout their life or indeed their environmental impact. When purchasing purification equipment, delivered air quality, the overall cost of ownership and the equipment's environmental impact must always be considered.
Feature & Benefit
1. Aluminum Alloy material, 15 years serve life for filter housing under working condition from temperature 1.5ºC~80ºC.
Maxi. Pressure is 1.0Mpa.
2. 6000~8000 hours serve life for filter element,filtering performance up to 99%
3. Integrated die-casting filter up to 3 inch, flow rate up to 37.2m³/min.
4. Alternative for Domnick Hunter Oil X Plus Series.
7 Grades Filter Element: PF/AO/AA/AX/ACS/AR/AAR
| PF |
AO |
AA |
AX |
ACS |
AR |
AAR |
| As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible |
High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21ºC),1ppm(w). |
High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC),0.01ppm(w) |
Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC),0.001ppm(w) |
Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21ºC),0.003ppm(w) |
Dust particles whose diameter more than 1μm can be removed |
Dust particles whose diameter more than 0.01μm can be removed |
Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g).
For application in other working pressure, please refer to the correction factors.
| Model |
Pipe size |
Flow rates |
Dimension (mm) |
| L/S |
m3/min |
scfm |
W(Width) |
D(Depth) |
H(Height) |
A |
B |
C(clearance for housing) |
| YD017 |
RC1/2" |
16.7 |
1.0 |
35.3 |
89 |
79 |
246 |
40 |
186 |
118 |
| YD025 |
RC3/4" |
25.0 |
1.5 |
53.0 |
89 |
79 |
246 |
40 |
186 |
118 |
| YD030 |
RC1/2" |
30.0 |
1.8 |
63.6 |
89 |
79 |
280 |
40 |
220 |
158 |
| YD035 |
RC3/4" |
33.3 |
2.0 |
70.6 |
89 |
79 |
280 |
40 |
220 |
158 |
| YD058 |
RC3/4" |
46.7 |
2.8 |
98.9 |
120 |
110 |
377 |
55 |
276 |
195 |
| YD068 |
RC1" |
60.0 |
3.6 |
127.1 |
120 |
110 |
377 |
55 |
276 |
195 |
| YD080 |
RC1" |
80.0 |
4.8 |
169.5 |
120 |
110 |
477 |
55 |
377 |
290 |
| YD145 |
RC2" |
120.0 |
7.2 |
254.2 |
120 |
110 |
477 |
55 |
377 |
290 |
| YD220 |
RC1-1/2" |
200.0 |
12.0 |
423.7 |
162 |
151 |
676 |
64 |
566 |
480 |
| YD260 |
RC2" |
233.3 |
14.0 |
494.4 |
162 |
151 |
676 |
64 |
566 |
480 |
| YD330 |
RC2" |
267.2 |
16.0 |
564.8 |
162 |
151 |
984 |
64 |
875 |
780 |
| YD360 |
RC2-1/2" |
317.3 |
19.0 |
670.7 |
162 |
151 |
984 |
64 |
875 |
780 |
| YD405 |
RC2-1/2" |
367.4 |
22.0 |
776.6 |
200 |
189 |
757 |
78 |
634 |
560 |
| YD430 |
RC3" |
467.6 |
28.0 |
988.4 |
200 |
189 |
1012 |
78 |
634 |
560 |
| YD620 |
RC3" |
620.0 |
37.2 |
1313.6 |
200 |
189 |
1012 |
78 |
889 |
780 |
| Technical requirements |
Maximum operating pressure: 10 barg Operating temperature: 1.5°C~80°C. |
| Pressure |
Barg |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
| Psig |
15 |
29 |
44 |
59 |
73 |
87 |
100 |
116 |
131 |
145 |
160 |
174 |
189 |
203 |
219 |
232 |
| Correction factor |
0.38 |
0.53 |
0.65 |
0.76 |
0.85 |
0.93 |
1.00 |
1.07 |
1.13 |
1.19 |
1.23 |
1.31 |
1.36 |
1.41 |
1.46 |
1.51 |
Product Pictures
Product Application
YUKA Certificates
YUKA Patents
YUKA Factory
YUKA Facility
YUKA in Shanghai ComVac Asia & Hannover Messe Exhibition
YUKA Delivery
YUKA service:
a. Providing professional consultation, technical support and special solutions
b. Providing timely feedback on complaints
c. Providing perfect after sales service and warranty
Q:Why choose us?
a. 22 years' practical experiences in R&D and manufacturing Compressed air treatment;
b. Founder of Compressed Air Nation Standard GB/T30475.1-2013 and GB/T30475.2-2013;
c. ISO 9001:2015, CE and product follow ISO8573-1;
d. With Germany Imported high efficiency filtration Test Instrument;
e.All goods had been 100% test before dispatched.
Frequently Asked Questions:
Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and sales.
Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production.
Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5 working days after 30% payment.
Q4. Do you have a warranty?
Yes, for filter, it is 1 year normally.
Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the best solution and complete production processes and control to provide you with satisfied product.
){kind=link}
){kind=link}