Newest Refrigerated Air Dryer Hhl150 with High Precision

• After-sales Service: Overseas Support
• Warranty: One Year
• Flow: Cross Flow
• Material Status: Powder
• Drying Medium: Air
• Structure: Enclosed
• Model NO.: HHL150
• Operation Pressure: Atmospheric Pressure
• Inlet Temperature: 38~65ºC
• Cooling Way: Air Cooling
• Type: Medium
• Power: 380V 50Hz
• Flow Rate: 17.0m³/Min
• Inlet Power: 3.00
• Pipe Size: DN50 Flange
• Refrigerant Type: R407c
• Net Weight: 210kg
• Transport Package: Wooden Cardboard
• Specification: 1800x850x1286mm
• Trademark: YUKA
• Origin: China
• HS Code: 8419399090
• Production Capacity: 10 Pieces/Day

Product Description

HHL Refrigerated Air Dryer

It is one of the indispensable equipment. It eliminates all the condensed moisture of compressed air in the industrial field.

The compressed air used in the industrial field contains a lot of moisture, which will not only cause product defects, but also shorten the service life of the equipment. Therefore, it is very important to use clean and pure compressed air without water.

Refrigerant air dryer is one of the necessary equipment to remove the moisture in the compressed air condensed by the compressor in the industrial field.


TECHNICAL SPECIFICATION

Model	Flow rate (m³/min)	Power Supply	Input Power (kw)	Pipe Size	Refrigerant Type	N.W. (kg)	Measurment (L×W×H mm)
HHL010	1.2	220V 50Hz	0.37	RC 3/4"	R134a	66	800×460×850
HHL020	2.4	220V 50Hz	0.52	RC 3/4"	R134a	82	900×560×885
HHL030	3.6	220V 50Hz	0.73	RC 1"	R410a	98	950×610×885
HHL060	6.5	220V 50Hz	1.26	RC 1-1/2"	R410a	130	1200×560×1070
HHL080	8.5	220V 50Hz	1.87	RC 2"	R410a	160	1400x610x1200
HHL100	11.0	220V 50Hz	2.43	RC 2"	R410a	163	1400x610x1200
HHL120	13.5	220V 50Hz	2.63	RC 2"	R410a	186	1450x610x1200
HHL150	17.0	380V 50Hz	3.00	DN50 Flange	R407c	210	1800x850x1286
HHL200	23.0	380V 50Hz	3.70	DN65 Flange	R407c	240	2000x900x1403

FEATURE & ADVANTAGE & BENEFIT

--Energy-saving
The design of aluminum alloy three-in-one heat exchanger minimizes the process loss of cooling capacity and improves the recycling of cooling capacity. Under the same processing capacity, the total input power of this model is reduced by 15~30%.

--Efficient
The integrated heat exchanger incorporates a flow guiding fin to make the compressed air exchange heat evenly inside. It is oil-free, water-free and dust-free. The built-in gas-water separation device is equipped with a stainless steel filter to make the water separation more completely.

--Intelligent
Multichannel temperature and pressure monitoring, real-time display of dew point temperature, automatic recording of accumulated running time, self-diagnosis function, display corresponding alarm code, and automatic protection of equipment.

--Environmental protection
In response to the international Montreal agreement, all models in this series use R134a and R410a environmentally friendly refrigerants, which have zero damage to the atmosphere and adapt to the needs of the international market.

--Stable
standard constant pressure expansion valve, standard intelligent temperature control, laboratory test, when the intake air temperature reaches 65 ° C, the ambient temperature reaches 42 ° C, it is still stable operation, with temperature and pressure double antifreeze protection, and When the engine is operated for a long period of time, the output of the compressor is automatically stopped, and the amount of cooling stored by the aluminum plate is exchanged to provide heat exchange. Extend the life of the equipment while saving energy.


WORKING CONDITION AND TECHNICAL TECHNICAL
Rated ambient temperature: 38 ° C, max. 42 ° C.
Rated compressed air inlet temperature: 38 ° C, max 65 ° C
Rated compressed air pressure: 0.7Mpa, max. 1.0Mpa
Pressure dew point under rated conditions: 2 ° C ~ 10 ° C (atmospheric dew point: -23 ° C ~ -17 ° C)
Installed environment: no sun, no rain, good ventilation, installed in a horizontal hard foundation, no obvious dust and flying flour.


FACTORY


CERTIFICATE


FAQ

Q: Are you a trading company or a factory? 
A: We are a professional manufacturer of compressed air separation, filtration and purification equipment since 1998.

Q: Do your company accept ODM & OEM?
A: Yes, of course. Full ODM & OEM accepted and we have professional R&D team.

Q: What payment methods do you accept?
A: T/T.

Q: What are your payment terms?
A: 30~50% T/T in advance, balance before shipping.

Q: How long will you arrange shipping after order confirmed?
A: Generally speaking, 10-30 days after receiving your payment. If some small available parts, we can send in 3-5 days. Pls be aware that production leading time is due up to specific items with different quantity.

Q: How about your warranty?
A: One year warranty provided after you receive our products.